Elon Musk says ‘we dug our own grave’ with the Cybertruck as he warns Tesla faces enormous production challenges::Tesla CEO Elon Musk said Wednesday that the Cybertruck’s unique design means the company faces immense challenges in scaling production.

    • nomecks@lemmy.world
      link
      fedilink
      English
      arrow-up
      16
      arrow-down
      1
      ·
      1 year ago

      Cool. Build 10 pieces and fit them together with sub 10 micron precision.

      • FakinUpCountryDegen@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        23
        ·
        1 year ago

        Ok, and once that’s done with the high level of repeatability and quality I’ve done it a thousand times, then what?

          • FakinUpCountryDegen@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            arrow-down
            17
            ·
            edit-2
            1 year ago

            The heaviest Tesla is around 2.5 tons…but that’s beside the point.

            The scale doesn’t matter. In fact, taking a desktop process and industrializing it makes it more accurate and repeatable - especially in a large-item manufacturing setting.

            The best argument against the 1 micron requirement is that it’s unnecessary from a practical standpoint. I completely agree with that, for sure.

          • FakinUpCountryDegen@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            arrow-down
            16
            ·
            1 year ago

            It depends on the model being printed.

            1 micron is easy to achieve on the Z axis with almost any printer, using any 3d printing technology (FDM/SLP/SLA/etc).

            In the X/Y axis, the vast majority of FDM printers are off the table for 1 micron - increasingly so as the Z height of the model increases, especially on bed-slingers like the Ender 3. The taller the model, the harder it is to maintain accuracy on X and Y.

            In SLA/DLP printers, it’s all about the motor, controller, and whatever shields excess light/beam diameter.

            To answer your question directly: I have no trouble getting highly reliable micron accuracy in a $99 Creality Halot. The key is to understand your model in relation to the pixel density of the screen. Some calibration prints tell you where the steps are, describing the relationship between input and output - which will most certainly be different from printer to printer at the consumer level. Once you have that data, some simple math tells you exactly how to design your object in a way that takes these natural constraints into consideration.

            Yes - at any scale, even at the size of a car…or a battleship. When you accept the constraints of the hardware into the design of the object being produced, you can get micron repeatability out of just about anything.

            • magnusrufus@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              So does that mean that you can get 1 micron accuracy as long as the part is sized to a multiple of the pixels width on the x and y? Is that just for aligned straight edges or can that be done for curves too?

              • FakinUpCountryDegen@lemmy.world
                link
                fedilink
                English
                arrow-up
                2
                arrow-down
                10
                ·
                edit-2
                1 year ago

                The pixel alignment is a good place to start, but no 2 printers will produce an identical result at that level. That’s why it’s important to tune the model to the printer - not the other way around.

                Can you get it on curves? Yes, certainly. For 3d printers, even the position you choose for the model within the build area makes a difference.

                The question is really about executing the process of engineering in the correct order.

                The most common mistake is to design the thing you want to build first. In reality, you start with what is essentially a sketch of what a functional end product looks like. Then, you buy/build tools/manufacturing equipment. Finally, you refine your sketch into a manufacturable product based on assessment of the most reliably repeatable results available from the actual machinery as it is installed.

        • halferect@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          arrow-down
          1
          ·
          1 year ago

          Then take them to a different environment and measure them and then put a Lil water on them and measure them. Then get a mechanic to fix them and then shove it up your butt because any real engineer designing a car would tell you that kinda precision is just fucking stupid at production level for a car

          • FakinUpCountryDegen@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            arrow-down
            6
            ·
            1 year ago

            I’ve already said a dozen times: no shit Sherlock, this is absolutely unnecessary for this application.

            It’s also completely irrelevant to change up the environmental parameters when that is not a constraint set at the outset of this conversation.

            I swear to God, it’s like there’s an entire subspecies of moron non-engineers who exist for the sole purpose of arguing where no argument exists.

            • halferect@lemmy.world
              link
              fedilink
              English
              arrow-up
              3
              arrow-down
              1
              ·
              edit-2
              1 year ago

              A car doesn’t go through environmental changes? Because we are talking about engineering a car. You are talking about your 3d printed dildo of musks cock or something that you got into microns or some shit. It’s almost like there’s a entire subspecies of moron non-engineers who exist for the sole purpose of arguing about why musks cock is microns… you asked what to do next

              • FakinUpCountryDegen@lemmy.world
                link
                fedilink
                English
                arrow-up
                1
                arrow-down
                6
                ·
                1 year ago

                Are you still arguing with a ghost? Nobody said a car doesn’t go through environmental changes… It just has nothing to do with this discussion.

    • dragontamer@lemmy.world
      link
      fedilink
      English
      arrow-up
      12
      arrow-down
      1
      ·
      edit-2
      1 year ago

      Bullshit.

      The thermal coefficient of expansion of say… Aluminum is 23.

      That means that when a 1 meter piece of Aluminum rises from 20C to 21C, just one degree Celsius, it grows by 23 microns.

      Your 3D printer is not a temperature controlled precision instrument. Your tolerances are no where close to 10 microns let alone 1 micron.

      There are micron-level precise instruments in the engineering world. They all come with temperature characteristics because thermal expansion is a bitch. 3D printers that literally heat up hundred degrees and cools down regularly literally can’t be this precise, the heat alone wrecks your precision.

      • FakinUpCountryDegen@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        15
        ·
        edit-2
        1 year ago

        Bullshit.

        You’re changing the premise of the question.

        Pick a temperature - design your model to be whatever you need it to be at that target temperature - just like every other engineer with 26 years of experience, such as myself.

        (by the way, my UV resin printer is quite temperature stable.)

        • dragontamer@lemmy.world
          link
          fedilink
          English
          arrow-up
          6
          arrow-down
          1
          ·
          edit-2
          1 year ago

          Your resin printer does not have the resolution of 1/15th the size of a damn white blood cell. Your blood is 15 microns per cell or so. Red blood cells are smaller at around 7 microns.

          You, and Elon, have confused your units quite significantly. I’ve given you the opportunity to see your error by reminding you the difference between thou, mils, mm, and microns. But apparently you haven’t gotten the hint yet.

          My university created micrometer-sized balls, gears, and other such devices. They’re called MEMS and are really cool. They’re not made with 3d printers but instead lithography (same technology as computer chips, because they’re so small its easier to make through lithography). You’ve confused your units and its clear based off of how you’ve been talking. Take a step back, and double-check the difference from thou, mil, mm, and microns.

          • FakinUpCountryDegen@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            arrow-down
            12
            ·
            1 year ago

            Sigh.

            Please stop being confused about the capabilities of modern SLA/DLP processes.

            What is the diameter of A PHOTON? And don’t forget to answer ignorantly, in a condescending i-know-more-than-my-betters tone. No, seriously - look it up. You clearly don’t know.

            How many blood cells wide is light? By all means - tell me what the particulate size of photocuring resin might be? Could it be…2 microns maximum even for the largest ceramic-infused resin slurry - with sub-micron particulate sizes easily available even from Amazon? Yes - far, far smaller than blood cells. This is why you can’t let this shit get on your skin. It will literally traverse the blood-brain barrier. The fumes can get particles of this size into your bloodstream.

            Well, what on earth can I do to get 1 micron accuracy from zero-width photons and 2-micron UV cured particles? Perhaps - design my model to be LITERALLY ANY SIZE that happens to be divisible by 2 on X, Y, and Z axes, then center it on the build plate?

            Can you please get with the program, here? I’ve likely been doing this work longer than you’ve been alive. I’m not even supporting Elon’s demand, which is almost certainly unnecessary for this application.

            • dragontamer@lemmy.world
              link
              fedilink
              English
              arrow-up
              4
              arrow-down
              1
              ·
              edit-2
              1 year ago

              What is the diameter of A PHOTON? And don’t forget to answer ignorantly, in a condescending i-know-more-than-my-betters tone. No, seriously - look it up. You clearly don’t know.

              Thanks for giving me more absurd examples. Your UV light is a 400nm wavelength or so. Or roughly 1/3rd a micron. The fucking wavelength of your curing light.

              Now get outta here with your attempts at pretending that your $200 UV printer has the level of accuracy of three fucking wavelengths of the light it’s using.

              The size of the color red? That’s 700nm wavelength, or 0.7 microns. Your resolution that you’re printing here is no where close to the size of red-light photons.

              zero-width photons

              Oh, so you don’t know how light works either. Good grief man… light has a size and you’re running up against the size limitation of the light itself. Especially because I know for a fact that these UV Printers are NOT using lasers, so you have no way to actually line up all the photons to hit the same location since their wavelengths are all unaligned.

              In any case, car parts are not made at scales comparable to the wavelength of infrared light (ie: the “size” of a infrared-light photon).

              • FakinUpCountryDegen@lemmy.world
                link
                fedilink
                English
                arrow-up
                1
                arrow-down
                10
                ·
                1 year ago

                Shocking narcissism, yet again.

                You clearly have no intent to learn from your mistakes and pollute your entire argument with ad hominem and every other logical fallacy in the book - all wrapped up with a bow of dismissal of the original premise.

                Oh, and by the way, light is both a particle and a wave. “light has a size” - indeed, the wave of light we aren’t talking about has a size - called wavelength. Don’t be afraid to use the most accurate terminology for your irrelevant responses! The wavelength has zero influence on the dimensions of the final product, as any wavelength more than a couple nm out of spec won’t cure the resin at all, and there will be no object to measure. I think you know that and are just trying to win an argument by talking over the heads of the average readers on here - which doesn’t help your case.

                It’s extremely likely you legitimately have a personality disorder, and are capable of much more if you clean up your act.

                • AlotOfReading@lemmy.world
                  link
                  fedilink
                  English
                  arrow-up
                  5
                  arrow-down
                  1
                  ·
                  1 year ago

                  Wavelength has a very direct impact on the resolution you can print because it’s an optical system. Under perfect conditions, it’ll be diffraction limited, which is typically anywhere from several hundred nm to tens of microns. That’s an ideal system though, you’re actually going to be getting a dimensional accuracy somewhat above that in practice, probably tens to hundreds of um.

                  • FakinUpCountryDegen@lemmy.world
                    link
                    fedilink
                    English
                    arrow-up
                    1
                    arrow-down
                    8
                    ·
                    1 year ago

                    Please make sure Form Labs, and the rest of the companies I have worked for, are aware of how wrong their engineers are.

                    I’m not sure what the obsession is with arguing against the list of objective facts I have provided - each argument peeling away into a deeper and more obvious lack of understanding…

                    Please feel free to run anything other than the recommended wavelength of UV light through a photoreactive polymer resin and let me know the dimensions of your resulting print. Remember to do it twice, so you can compare the results - the point of this discussion. Repeatable results, to 1 micron of accuracy.

                    (your repeatable result will be a measurement of thin air, as your print will not cure - but feel free to try, as I’ve said.)

      • FakinUpCountryDegen@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        7
        ·
        1 year ago

        This is definitely true in terms of industrial production. (super cheap for “makers” - taking the hardware constraints into consideration with the design, of course).

      • FakinUpCountryDegen@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        6
        ·
        1 year ago

        https://www.creality3dofficial.com/products/ld-002r-lcd-resin-3d-printer

        Don’t forget - it’s not as simple as just buying the printer. You need the right resin, several iterations of test models, and the right modifications of the model to work within the constraints of the printer and material.

        With the right tuning, you will be able to create parts which measure within 1 micron tolerance reliably. (don’t forget to use an indicator and good reference blocks - you aren’t going to measure microns with a caliper or micrometer)