Here is the other side: https://imgur.com/a/DQQooDk

Gushing about CoreXY:

I finally got around to upgrading to a klipper based core xy machine and it is magic I went for the K1 Max, since it was $680 after discounts and it’s 300mm3 (1.5X the size of a X1C)

Accelerations are 10x faster, print times are 4x shorter compared to my highly modded ender3 and cr-10. this build took about 12hr of print time, normally it was 2 full days.

NO sanding, NO filing, NO heating things up to make them fit right.

Every single piece came off the build-plate perfectly ready to go, aside from my intentionally under-sized pivot and takedown pin holes. I like to drill those out personally…

Now for the specifications:

  • Daichi Upper + shroud (modified)
  • DS1913 Lower v1.2 (modified)
  • Slim Everytown mag (modified)
  • Get Bent angled grip
  • Mini hand stop
  • sling mount is just the mount from SG22 brace
  • Sling is a laptop bag strap 😆
  • The muzzle device is an AKM compensator I modified to work for AR barrels. It works marvelously to prevent muzzle climb. Check the video how the gas is going up and forward.
  • The binary is the mythical Invisibinary by Klaviermeister. It was taken down years ago but if you have half a brain you can find it still. Fosscad of reddit keeps making posts begging for the files every few months lol. they all give up and pay $400 for a storebought binary.

Wondering about reliability? I have thousands of rounds through this binary trigger. check out this clip of a mag dump at 600RPM: https://imgur.com/a/khxhymP

this firearm is for self-defense only. The quote is from Woody Guthrie's guitar ___

  • aodhsishaj@lemmy.world
    31·
    1 year ago

    It’s been 10 minutes… your bucket got a hole innit?

    Tell me about that lower, is that a full size mag well?

    Do you have an stl for the this machine kills fascists quote? I want to embed that in a couple lowers.

    • 4lan@lemmy.worldOP
      3·
      1 year ago

      I got instant downvotes LOL. Before anyone could have even read it all.

      That media driven division is doing wonders

      That lower is a classic design from the early days of FOSSCAD. I don’t like the V2 that came out last year. It has a full size magwell so I can us CMMG mags, the top of this magazine is sized appropriately for the magwell.

      No I directly modelled it into the upper. There are STEP files for the upper widely available, its like a 3 minute task in CAD. I suggest making the pivot and takedown pin holes 6.1mm and drilling them to 6.2mm

      edit: I can send you the STL for the upper if that helps, but its not extruded, it’s embossed. Not much use unless you want this specific upper.

      • aodhsishaj@lemmy.world
        3·
        1 year ago

        Awesome thanks for the run down.

        May all your pews be pews and your binary trigger bring you many bangs

        • 4lan@lemmy.worldOP
          1·
          1 year ago

          no bangs, just burrrrrs lol

          I always get asked if it’s full auto at the range haha It’s literally just as fast as a fully auto in 22LR

          you have to learn the rhythm though so you don’t out run the bolt or do the “pop pop…pop pop…pop pop” that I used to do when I wasn’t used to it