SOLVED by @jj122@lemmings.world

Make sure all power connections on the mb are made (there are more than just the 24 pin).

I hadn’t connected the PSU CPU cable. Now it works: https://streamable.com/9bwg1k

Also thanks guys for suggesting the dual channel slots spacing between the memories.

Thanks everyone. You’re all wonderful.


See video https://streamable.com/agio65

PC SPECS:

  • themoonisacheese@sh.itjust.works
    link
    fedilink
    arrow-up
    5
    arrow-down
    1
    ·
    edit-2
    11 months ago

    Locate you POST diagnosis LEDs (usually top right of the motherboard). Are any of them on? If so, there’s your problem. Would help to have more info like config and where you plugged everything in.

    Edit: probably not your problem right now but I can tell you straight away you plugged in your ram wrong. If you only have 2 sticks, they should never be touching, to take advantage of dual-channel. Refer to your motherboards manual on how to install ram. Also refer to your motherboards manual’s troubleshooti’g section, maybe there are elements you should look at mentioned there.

    • lindafjwj@lemmy.todayOP
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      11 months ago

      Locate you POST diagnosis LEDs (usually top right of the motherboard). Are any of them on? If so, there’s your problem.

      I found multiple supposedly LEDs both at the top right and bottom right, but none of them are on.

      Would help to have more info like config

      • CPU: Intel Core i9-12900K
      • iGPU: Intel UHD Graphics 770
      • Motherboard: GIGABYTE B760M AORUS ELITE
      • Power supply unit: Corsair CV 650
      • Primary memory RAM: CORSAIR Vengeance 32GB DDR5 (2 x 16GB)
      • Secondary memory SSD: Western Digital WD BLACK SN770 M.2 2280 1TB
      • CPU Cooler: Cooler Master Hyper 212
      • Case: Corsair 220T RGB
      • Monitor: LG 24MK430H 24"
      • Keyboard: Logitech K120 USB

      and where you plugged everything in.

      What exactly do you mean?

      you plugged in your ram wrong. If you only have 2 sticks, they should never be touching, to take advantage of dual-channel. Refer to your motherboards manual

      thanks, I just set it according to mobo manual pg 15 for 2 modules