• ch00f@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    2
    ·
    5 months ago

    It’s a USB3 port and I think the only peripheral on the bus, so I guess I’m lucky. Thanks for the examples. I’ll keep an eye out for those.

    As far as your point about the SNR is that because oversampling only reduces read noise, but can’t actually reduce the noise present in the air? (Been a ham for 9 years, but still new to SDR)

    • Thomas Douwes@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      1
      ·
      5 months ago

      The USB3 won’t make a difference. It’s actually a hardware issue with the rtl2832u in the SDR that causes the drop. I’m not sure why one controller is OK, but that’s what I’ve heard.

      I’ll be honest that I don’t really understand why oversampling helps. But as far as I know it only increases the dynamic range, and if you don’t have a large difference between the weakest and strongest signals you are receiving there isn’t any benefit. And also, yeah, the environmental noise is probably way higher that the ADC noise.

      If you’ve been a ham for 9 years, you probably know more about this than me. I’ve been into radio/SDR for about 1.5 years now, and I’ve mostly just done satellite stuff in that time.