Hey there. I have an Ibanez AX-7221 (Japanese made version) that has a damaged nut. I need to replace it, but am financially locked but do have access to a 3d printer.

Are there materials that can be printed which would be ok for this task and stand up to the stresses?

Edit: <3 to everyone that has given advice here. Much better than the 3d printing community’s answers I got.

  • mihnt@lemmy.caOPEnglish
    2·
    7 months ago

    Make sure to add enough perimeters to not get hollow spaces in the nut.

    Oh I was going to make 100% solid.

    If you manage to print it standing on its side (add a brim!), then the layer lines will follow string direction and the strings will glide better on the nut.

    You mean from the end here as circled?

    On of the thing I was actually also considering was making small tabs that I could use to keep it from sliding side to side and still replaceable. Think that would be wise or just glue the bastard down?

    • alleycat@feddit.deEnglish
      2·
      7 months ago

      You mean from the end here as circled?

      Yes, exactly!

      On of the thing I was actually also considering was making small tabs that I could use to keep it from sliding side to side and still replaceable. Think that would be wise or just glue the bastard down?

      Just use a tiny drop of superglue to hold it in place. It can still be carefully broken out and be replaced this way. The rest is done by string tension.

      • mihnt@lemmy.caOPEnglish
        2·
        7 months ago

        Yes, exactly!

        Cool, will do. Can’t be harder than the Ocarina I printed, lol.

        Just use a tiny drop of superglue to hold it in place. It can still be carefully broken out and be replaced this way. The rest is done by string tension.

        Gotcha. Here’s to hoping I don’t mess this up! Thanks for your advice!