This is an automated archive.

The original was posted on /r/proxmox by /u/adamsir2 on 2023-08-07 14:08:00+00:00.

Over the weekend I built my new proxmox box. Used new drives and used the hba from my old pm install. In my old pm build, I had 3 sata drives plugged into a LSI hba because I planned on expanding the drives in that build before building a new box. Since removing the hba and plugging the sata drives directly into the motherboard, the drives show up in the bios but pm fails to start an VMS saying that pvebulk is missing. Lsblk only shows one of the 3 drives. I’ve replaced cables, swapped ports and come to the same result.

My other issue is that using the same nic, possibly in a different port from install, I can’t connect to the network and therefore no access to the webui. Proxmox boots and the console output in my KVM shows the IP message but that IP doesn’t show up in my router or ping. IP a shows the same interface name as before so now I’m at a lose.

Any help is appreciated.