Backstory: I had a debian 11 VPS. I installed the postgresql program from the debian 11 apt repo, back a few months ago. Back then, it was postgres 13 on the debian stable repos.

Fast forward couple months: debian 12 comes out. I do a “apt dist-upgrade” and in-place upgrade my VPS from debian 11 to debian 12. Along with this upgrade, comes postgresql 15 installed.

Now, fast forward couple more months: lemmy 0.18.3 comes out. I do not upgrade (I am on lemmy 0.18.2—afaik).

Fast forward some time, too: lemmy 0.18.4 comes out. I decide to upgrade to 0.18.4 from my existing 0.18.2.

I pull the git repo. Compile it locally. It goes well, no errors in the compilation process. I stop the lemmy systemd service, then I “mv” the compiled “lemmy_server” to /usr/bin dir.

I try to restart the now-upgraded lemmy systemd service. However, the systemd service fails.

I check the sudo journalctl -fu lemmy and I see the following error message:

lemmy_server[17631]: thread 'main' panicked at 'Couldn't run DB Migrations: Failed to run 2023-07-08-101154_fix_soft_delete_aggregates with: syntax error at or near "trigger"', crates/db_schema/src/utils.rs:221:25 

I report this issue here: https://github.com/LemmyNet/lemmy/issues/3756#issuecomment-1686439103

However, after a few back and forths and internet search, I conclude that somewhere between lemmy 0.18.3 and 0.18.4, lemmy stops supporting psql <15. So, my existing DB is not compatible.

Upon my investigation on my VPS setup, I concluded that psql 15 is running, however, lemmy is using the psql 13 tables (I do not know if this is the correct term).

Now my question: is there a way to import the lemmy data I had in the psql 13 tables to a new psql 15 table (or database, I don’t know the term).

To make things hairier: I also run a dendrite server on the same VPS, and the dendrite server is using the psql 15 with psql 13 tables on the same database as the lemmy one.

The dendrite database is controlled by a psql user named “dendrite” and the lemmy database is controlled by a psql user named “lemmy” . I hope this makes differentiation between two databases possible. And so I do not harm my existing dendrite database.

Any recommendations about my options here?

  • RoundSparrow@lemmy.mlM
    link
    fedilink
    arrow-up
    1
    ·
    edit-2
    1 year ago

    you don’t have a port number specified in lemmy.json it is either using the default value or you have LEMMY_DATABASE_URL set?

    Do you have an environment variable: LEMMY_DATABASE_URL in your lemmy_server service config or otherwise?

    Lookibg at the Rust source code, there is a comment that says “// The env var should override anything in the settings config”

    • Anark Karabey@monero.townOP
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      I think my setup is using the default value.

      I do not see me specifying the LEMMY_DATABASE_URL in my systemd file:

      $ cat /etc/systemd/system/lemmy.service
      [Unit]
      Description=Lemmy - A link aggregator for the fediverse
      After=network.target
      
      [Service]
      User=lemmy
      ExecStart=/usr/bin/lemmy_server
      Environment=LEMMY_CONFIG_LOCATION=/etc/lemmy/lemmy.hjson
      # remove these two lines if you don't need pict-rs
      Environment=PICTRS__SERVER__ADDR=127.0.0.1:8080
      Environment=PICTRS__STORE__PATH=/var/lib/pictrs/files
      Environment=PICTRS__REPO__PATH=/var/lib/pictrs/repo
      Restart=on-failure
      
      # Hardening
      ProtectSystem=yes
      PrivateTmp=true
      MemoryDenyWriteExecute=true
      NoNewPrivileges=true
      
      [Install]
      WantedBy=multi-user.target
      
      • RoundSparrow@lemmy.mlM
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        I do not see me specifying the LEMMY_DATABASE_URL in my systemd file:

        ok, so you have a choice… we have to figure out the syntax of the port number in config file, or you introduce a LEMMY_DATABASE_URL in your lemmy.service file.

        • Anark Karabey@monero.townOP
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          I would go with introducing LEMMY_DATABASE_URL in my lemmy.service file. However, is doing that going to expose my lemmy database password to the lemmy.service file?

          • RoundSparrow@lemmy.mlM
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            yes, the password will need to be in the LEMMY_DATABASE_URL… but a lemmy.service should be secure… ? I mean it’s kind of thing the system using during boot.

            • Anark Karabey@monero.townOP
              link
              fedilink
              arrow-up
              2
              ·
              1 year ago

              but a lemmy.service should be secure…

              yeah it is secure, as the root user password is required to do anything with that file. Alright, let’s do this.

              • RoundSparrow@lemmy.mlM
                link
                fedilink
                arrow-up
                2
                ·
                1 year ago

                So the next step is the backup, did you do the backup of lemmy data from 13? And spot-check that it looks like your data?

                • Anark Karabey@monero.townOP
                  link
                  fedilink
                  arrow-up
                  2
                  ·
                  1 year ago
                  user@server:~$ sudo -iu postgres /usr/lib/postgresql/15/bin/pg_dump --port=5432 lemmy > /home/user/lemmy_databackup.sql
                  user@server:~$ ls -la lemmy_databackup.sql
                  -rw-r--r-- 1 user user 56554817 Aug 23 00:59 lemmy_databackup.sql
                  user@server:~$ ls -lah lemmy_databackup.sql
                  -rw-r--r-- 1 user user 54M Aug 23 00:59 lemmy_databackup.sql
                  
                  • RoundSparrow@lemmy.mlM
                    link
                    fedilink
                    arrow-up
                    1
                    ·
                    1 year ago

                    it’s plain text, I suggest grep against it for something you know is in there… that you created? Just to be sure when we do a restore against port 5433 we aren’t overwriting good data ;)