I have an antique desk which has three locks and a single key.

My key continues to work for one of the locks, but when inserted into the other two lock key ways, the key will not turn in either direction (will basically wiggle a millimeter or so in either direction, but does not start to actually turn).

I am a very amateurish lock picker—I can rake a basic lock or use a snap gun, but this lever/mortise lock is very different from anything I have tried to pick before.

I should mention that I used the working lock to confirm that the key fully inserts into the other two locks before attempting to turn the key.

I’ve tried looking up tools for picking this lock and watched some YouTube videos.

I am curious if anyone with experience picking this sort of lock might offer some advice on tools to get or improvise.

I’m including a photo of the key to help identify what might be needed.

Any advice is appreciated.

    • Hux@lemmy.mlOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I measured the key and found a few good candidates on Amazon—we’ll see how it goes once I have them. Thanks!

      • lfisk@infosec.exchange
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        @Hux In looking at the keys via AZ you’ll notice the “notch” in the key changes positions by small amounts and sometimes to the opposite side. This is to work with different warding. It prevents the key from working in all the locks it might fit into🙂​

  • D61 [any]@hexbear.net
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    ooh… gonna comment here to see if anybody has a good answer.

    So the bottom finger of the key is probably doing the work of moving the bolt in the lock. I wonder how far my guess of “two tumblers” is from being correct?

    Junk stores or hobby jewelry making shops might have the same style of keys for, probably not too much money. If the metal is fairly strong, you could try to find a key with the same size barrel and lever. File the lever part so that the opening is larger towards the barrel than your one working key and maybe get away with filing down the top part of the barrel to give yourself some space to get a pick in over the top. This modified key will be your torque wrench and a bent wire over the top to try to wiggle the tumblers.

    If you can get the desk on its back or maybe flipped upside down that might help fight the springs (if there are any).

    I went and looked at the internet for videos and found one here that made me think I was on the right track

    Invidious link to a youtube video from Lock Noob: (093) Beginners Guide to Curtained Lever Locks and Lever Lock Picking

    The lock in the video is way more complicated than a simple desk drawer but I’d imagine that the basics should be the same.