• 🇰 🌀 🇱 🇦 🇳 🇦 🇰 ℹ️@yiffit.net
    link
    fedilink
    English
    arrow-up
    1
    arrow-down
    3
    ·
    edit-2
    1 year ago

    Really now?

    USB 2.0 has the same power output as USB 1.0 and does not support fast charging.

    From wikipedia. If the port on the device only supports 2.0, how does it handle the extra power input to allow fast charging? And what devices have a USB-C port that isn’t using the 3.2 standard?

    • __dev@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      It’s a little complicated. A USB-3 connection must provide higher current 900mA than a USB-2 connection 500mA. As such a USB-3 data connection can charge faster than a USB-2 connection - some people may call this “fast charging”.

      However USB-PD (Power Delivery, aka fast charging) was released as part of the USB 3.1 specification, but it does not require a USB-3 data connection and neither does a USB-3 data connection require USB-PD. You can see all the different USB-C modes on Wikipedia as well, where USB-2 and Power Delivery are listed separately: https://en.wikipedia.org/wiki/USB-C#USB-C_receptacle_pin_usage_in_different_modes

    • iminahurry@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      That’s the part you are missing. Modern charging doesn’t use standard USB power. That’s the whole fast charging landscape is addressing.

      Read this https://www.androidcentral.com/qualcomm-quick-charge

      The power brick can supply more than 5 V over a standard USB port because it’s not adhering to USB standards for supplying power. As a result, data and power are decoupled, allowing the power brick to supply more than a standard USB port over a connector and cable which are identical to USB ports and cables.