Is this the first image of this device from Soulock being worn? I couldn’t find any in my searches. I thought the design was cool looking, and it wasn’t too expensive, so I decided to give it a try.

I know there’s no such thing as “escape-proof” when it comes to ball-trap style chastity devices, but this one includes an anti-cheating feature that I wanted to try. It’s a small ring piece that goes around the tip of your penis inside of the cage and I guess the idea is that if you cheat and pull out, it’s supposed to prevent you from reinserting. Well, it doesn’t work. With a little bit of lube and patient effort it’s not to difficult to get your penis out and back in again with no sign of your little transgression. I figured this out because after about four hours of wear, I started noticing the Indian burn sensation I’m familiar with from other plastic ball-trap devices, and I tried applying some lube to the base ring to alleviate it.

As for the flange on the top of the base ring, it looks cool, but it doesn’t do much to keep the device in place. If anything it just makes readjustments easier when it shifts during your run. Another interesting feature is the cage part, which actually opens like a clamshell with a hinge. It makes getting your penis in the cage a little easier, but you have to be careful not to pinch any skin when you close it.

Anyway, this device wasn’t a good choice for me.

  • b9999998@lemmynsfw.comM
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    11 months ago

    Thanks much! 🙏😍

    Update Dec 2: ordered the 8mm and 9mm from Amazon to experiment… looking forward to Monday!

      • Scoundrel_Husband@lemmynsfw.comOP
        link
        fedilink
        English
        arrow-up
        1
        ·
        9 months ago

        On the ones you ordered, do the 8mm and 9mm diameters refer to the flange or the shaft of the spout? If it refers to the flanges, what are the diameters of the shafts?

        • b9999998@lemmynsfw.comM
          link
          fedilink
          English
          arrow-up
          1
          ·
          9 months ago

          The flange - as that is really what matters as that diameter will determine whether you can easily install/remove it. The shaft is I think about 1.5 mm smaller…