Ok! I give up trying to find this stuff on my own, heh.

Anyway, I built my wife a large outdoor miniature diarama for Christmas and I’m wanting to do a winter theme for her opening (the door), and I’m rather stumped on these.

So far, the best solution I found was snow powder/flakes and spray on adhesive, but I’m definitely open to something else (that’s not overly costly, 🤷‍♂️. I spent a looooot on this so far).

It will have a dirt base, so the snow needs to adhere to that as best as possible.

  • ChamelAjvalel@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    4
    ·
    edit-2
    7 months ago

    Although it’s a pretty sheltered location, but wouldn’t the baking soda dissipate with any moisture? Humidity, rain, and/or snow?

    Edit: I just thought about it, and what I’ll do is run an experiment. I can place some near my kitchen sink’s handle. Water dripping from my hand and the humidity should give me a good idea how it’d work outside.

    • forty2@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      ·
      7 months ago

      Curious to hear how the experiment turns out, moisture wasn’t a consideration for my application all those years ago. You could be right, but I feel like baking soda with the glue might hold the moisture in

      • ChamelAjvalel@lemmy.worldOP
        link
        fedilink
        English
        arrow-up
        6
        ·
        edit-2
        7 months ago

        First issue I found, I needed to add a little water to the mixture so it would keep from pulling up the dirt as I tried to spread it on. Made it so I could just pour it over. Wtich means two things, I’ll see how moisture reacts to it, and have to wait maybe two days for it to dry…which, if so, might make it really difficult in that I’ll have to fill the unit with dirt before we move it (and it is quite heavy without the added dirt).

        Update:

        Well, I’ll be damned. I used a heat gun and it dried up within seconds…Everything is back on schedule again, 😃

        • forty2@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          7 months ago

          This is awesome! Thanks for following up Hopefully the moisture question has a good ending too

          • ChamelAjvalel@lemmy.worldOP
            link
            fedilink
            English
            arrow-up
            1
            ·
            7 months ago

            Welp! It browned in several spots over night. Maybe because of the dirt? Or the heat gun? Or???

            Next tests, I’ll need to try a two layer method. (one with a lower layer of baking soda, and another with a toilet paper bottom. That should help to deduce if the dirt was the cause of it).

            • forty2@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              7 months ago

              Looks like some dirt may have leaked up into the mixture? Gotta say I’m pretty invested in your project here 😅

              Loving your methodical approach too!

              • ChamelAjvalel@lemmy.worldOP
                link
                fedilink
                English
                arrow-up
                1
                ·
                7 months ago

                Loving your methodical approach too!

                Speaking of, I am spending way too much time on this, heh! I’ve got two hats and a pumpkin bag to knit, and a small painting to do ( Maybe more like these ). I’ll just stick to a cloth of some kind, and let her touch it up how she wants. 🤣 .