• BearOfaTime@lemm.ee
    link
    fedilink
    arrow-up
    6
    arrow-down
    1
    ·
    5 days ago

    Does the slide absorb any significant amount of energy?

    The spring can’t be all that strong since they can be assembled by hand, and what does the slide weigh? (Granted the slide is being accelerated, so I assume that’s where the bulk of energy is dissipated, MV^2 and all).

    What’s the math on this, say the dissipated energy in a semi auto VS revolver using the same round?

    (Really I’m curious what the numbers are, as I’ve read this many times but have no idea what the comparison is like).

    • justaderp@lemmy.world
      link
      fedilink
      arrow-up
      6
      ·
      edit-2
      4 days ago

      Remember conservation of momentum. The only way the machine can absorb part of the impulse is through friction, heat, and by redirecting the existing chamber pressure after the bullet has left the barrel.

      Remember the human body. Magnitude matters much more than duration. Extending the time of impulse by implementing a slide lessens magnitude, the areas under the impulse curves roughly equivalent.

      I’m going to apply the above to answer your questions to say it again :)

      Does the slide absorb any significant amount of energy?

      For a properly functioning, modern, and typically-designed pistol and a status quo definition of “significant”, the answer is: No. That’s not what it’s designed to do. But, energy can be dissipated slightly if the pistol is compensated: a redirection of chamber pressure from near the end of the barrel, upwards, counter the torque component of the recoil impulse.

      What’s the math on this, say the dissipated energy in a semi auto VS revolver using the same round?

      It’s not quite a good question. The maximum force during the impulse is what a human cares about when analyzing a slide. That’s what’ll effect accuracy of the next round and how sore your hands will be in the morning.

      If minimization of total impulse is what’s being analyzed then one would want to compare rifles. Rifles have larger rounds, longer barrel length thus more time to use chamber pressure to mitigate recoil.

      You’ve good questions for coming into the middle. Go to the beginning: rounds and various types of actions, rifleman 101. Come back to the hard science.

      • BearOfaTime@lemm.ee
        link
        fedilink
        arrow-up
        3
        ·
        edit-2
        2 days ago

        Thanks for the thoughtful reply.

        I’ve heard many times that revolvers or semi-auto have less recoil than the other, hence the question about slide mass/energy, as the only element I could see being different which could possibly explain why people hold this opinion.

        Do you know of any actual metrics/tests done that show this clearly? Or is it just a perception issue?

        (And yea, we’d have to agree on a definition of what we’re measuring/comparing). Do any gun magazines run proper tests occasionally to make comparisons?

        I admit my physics classes were a long time ago, but at first glance it seems felt recoil would only be marginally different between a revolver and a pistol using the same round. If anything, I’d expect the revolver to have a greater felt recoil, given the mechanics of a pistol… But I could very well be wrong.

    • ryathal@sh.itjust.works
      link
      fedilink
      arrow-up
      4
      ·
      4 days ago

      There is significantly more recoil in a revolver. It’s not just the slide, but the additional weight also helps reduce recoil.

      • raef@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        3 days ago

        Every revolver I’ve ever held has been heavier than a similar semi-auto. The cylinder is rather massive