I don’t have a problem with wireless headphones when it comes to mobile devices. It sucks, and I wish I still had a headphone jack, but I’ve kinda come to peace with the fact that wireless accessories for phones are apparently the future.
However, I wish there were “mid/high-end” Bluetooth/wifi cans. All the wireless headphones are either earbuds, IEMs, or overpriced Skullcandy/beats/Bose/apple/etc. I want an AKG or Audio-Technica pair of wireless headphones that go over my ears, and I want an option between closed-back and open-back headphones. I prefer closed-back due to the sound isolation and I’m annoyed that there’s a price gap where it’s hard to find closed-back headphones in the $300~$600 range.
…or at least it was when I checked a year or two ago; everything with a closed back was either entry (<$100), low-level (<$300) or too expensive (>$600 + $100 or more for an amp, because at that price range most headphones need one).
Edit: oh yeah, and a optional balanced cable that uses a standardized connector, like miniXLR
No judgement - just from reading your comment I definitely get this vibe. I get it though. Most wireless stuff is either going to be heavily EQed consumer trash or overpriced audiophile stuff with all the latest buzzwords. There just doesn’t seem to be much of a market for reference-grade stuff in a wireless format.
Not that I could justify spending a bunch on good headphones though, so I’ve settled for a low-end pair that sound acceptable for what they are.
I actually don’t, but maybe I should because I love audio stuff, I just don’t usually have the money to blow on it. Any idea what skills audio engineers usually have?
I used to actually know a ton about this stuff but haven’t touched a musical instrument or audio device in over 12 years. Sooooo, bear with me.
All of this will depend entirely where your interests lay in terms of audio production/engineering. One of the core skills would be the ability to pick out different sounds from a soundscape. I suspect you already have a knack for that given how much you seem to think about audio quality. Tied in with that would be an understanding of how digital audio works in terms of bitrate, dynamic range, what clipping sounds (and looks) like, etc. I’m sure there’s tons of info on all that online. Analog audio has a whole other set of skills associated with it, but I doubt it’s super accessible these days for a beginner. That’s outside of cassettes, at least. I’m sure old 4-track cassette recorders are super cheap. As much as I loved analog recording, you’re probably better off just going digitally and using processing to get an approximation of the “traditional” analog sound, though, if that’s your jsn. Or if you’re going for a black metal sound or something else intentionally grungy, go to town on a cassette deck.
From there I’d say the biggest skills would be understanding basic mic technique, the general physics of sound, and how to properly set your levels (basically the ratio of preamp vs amp). Next up would be figuring out basic processing - namely the different types of EQ and compression. Effects play into that too - especially reverb and delay - but EQ and compression (plus proper micing and levels) are generally going to be the foundation of a good mix.
That being said - this all entirely depends on what you’re going for. If you don’t do anything musical yourself and aren’t inclined to record other musicians, you can have tons of fun remixing other people’s work. I’m pretty sure there are sites out there where you can download raw audio tracks to mix yourself. Another viable option if you’re into electronic forms of music is to get a sequencer and experiment that way.
I got my start when I was maybe 13 or 14 with a cracked copy of Fruity Loops (I think it’s called FL Studio now). I used that to write dumb electronic songs despite having no theoretical musical or audio knowledge (besides having previously used the built in Windows sound recording software to layer weird shit I recorded with a crappy mic). That software also came with demo tracks that I experimented with. About a year later I got a bass guitar and started a punk band, and that led to all sorts of weird experimentation with recording mediums. From there I bought a shitty reel to reel tape deck and began recording punk bands out of their jam spaces, eventually went to school for audio engineering, had a bunch of jobs related to the art (while freelancing doing recording work and live sound), and finally burned out and never touched a guitar or mic again.
None of that is necessary or even something I’d recommend. It’s a perfectly legitimate hobby if you want to keep it small-scale. You can start it with almost no money, but that’s where I’d caution you if you have anything approaching an addictive personality - the gear can get super addictive as you begin a quest for the perfect tone. For a few years there I worked at a musical instrument store and most of my paycheck went right back to my work (the staff discount sure helped though). Likewise, most of what I’d make freelancing would go back to gear as well. That’s one of the big reasons I quit cold turkey one day. I still miss it as a hobby, but I know the second I start it back up I’ll be right back to dreaming of expensive tube preamps. Your own mileage may vary if you have better self-control.
One of the core skills would be the ability to pick out different sounds from a soundscape. I suspect you already have a knack for that given how much you seem to think about audio quality. Tied in with that would be an understanding of how digital audio works in terms of bitrate, dynamic range, what clipping sounds (and looks) like, etc. I’m sure there’s tons of info on all that online. Analog audio has a whole other set of skills associated with it, but I doubt it’s super accessible these days for a beginner. That’s outside of cassettes, at least. I’m sure old 4-track cassette recorders are super cheap. As much as I loved analog recording, you’re probably better off just going digitally and using processing to get an approximation of the “traditional” analog sound, though, if that’s your jsn. Or if you’re going for a black metal sound or something else intentionally grungy, go to town on a cassette deck.
I can already do a lot of this, and while I’m a bit lacking on the analog aspect, I have an okay understanding of how electricity works, which would probably help with the analog side.
From there I’d say the biggest skills would be understanding basic mic technique, the general physics of sound, and how to properly set your levels (basically the ratio of preamp vs amp). Next up would be figuring out basic processing - namely the different types of EQ and compression. Effects play into that too - especially reverb and delay - but EQ and compression (plus proper micing and levels) are generally going to be the foundation of a good mix.
Don’t have as much of an understanding here, especially when it comes to calling out specific frequencies to be EQ’d. I don’t do enough of that to be able to “play it by ear” and know what frequencies I want to adjust without some experimentation. I’m also somewhat familiar with how compressors work, but I need a UI because I tend to forget what bit does what, so I need visual feedback to show me what I’m changing. Shouldn’t be too difficult to memorize the terminology and how certain frequencies sound, but it would take some effort. I do understand how decibels work though!
That being said - this all entirely depends on what you’re going for. If you don’t do anything musical yourself and aren’t inclined to record other musicians, you can have tons of fun remixing other people’s work. I’m pretty sure there are sites out there where you can download raw audio tracks to mix yourself. Another viable option if you’re into electronic forms of music is to get a sequencer and experiment that way.
It’s something I’d probably do as a career. The career I wanted to go into has turned out to be extremely toxic and heavily exploitive, so I’m kinda looking for alternatives. That said, most creative careers tend to be very exploitive so I might be looking in the wrong place.
If you really truly are interested in it as a career don’t hold back, but know that it’s a looooooong road for very little money and absolutely no guarantees. Like anything fairly creative, only the top percentile make actual good money (or even sustainable money), and even then you usually have to freelance and build your own reputation to get there. That said, there are viable adjacent jobs that use that skillset. I worked in corporate AV for a few years, which involves running sound, lighting, and video for events. It’s far from glamorous though, and mostly involves manual labor in setups and teardowns. You’re basically a roadie who also runs the gear, but instead of mixing cool rock shows you’re mixing a few mics and a PowerPoint presentation for a pharmaceutical convention. The hours can also suuuuuuuck. My longest shift was 20 hours. I got home at 3 AM after that and then had to be back at the shop for 7. You live on free coffee and cookies that the banquet staff give you (you get to be on a first-name basis with every hotel banquet server in your city). It can be weirdly fun as a youngster but I have no idea how the older techs survived. I regularly worked 40 hour weeks when I was part time and 60-80 when full-time. I burned out by like 22.
The music store gig was really fun though. I ran the rentals desk and spent a lot of time teaching my customers how to use the pro audio gear. That’s also the most ridiculous place I’ve ever worked in terms of memorable stories.
You can also run sound in a dive bar, but that’s mostly about who you know and involves more networking than you’d expect to work in a dive bar for very little money.
As far as actually being a professional audio engineer or producer who makes a living making records - that’s the real tough part. I suppose it’s possible to land a staff job in a studio, but that’s not really how it worked in my small city. I freelanced with my own gear and home studio for years until I met a (relatively - this is Canada) big-name producer who I’d built rapport with from my job in the music store. He offered to let me work out of his proper studio for a very reasonable rate. Note that this wasn’t a job - it was an offer to pay him to use his facility. Still, it was the closest thing I had to a break and for a few glorious months I was (barely) scraping by as a full-time recording engineer. The clientele I had built up over the previous decade were almost exclusively local punk and garage rock bands, meaning none of them had money, and now they had to pay real studio fees on top of my own, so I was charging way too little. I was technically doing it though, but then I finally fully burned out - due in part to some looming personal issues - and that was that.
As to all your other comments - alllll of that can be learned through study and experimentation. I went to an overpriced school to learn the fundamentals, but a diploma like that means shit and you can learn it just as well on your own. With stuff like EQ you don’t need to be able to instantly pick out a good/bad frequency fully by ear - there are little tricks for zoning in on what you’re looking for (crank the gain on the EQ and scan the frequency range until you find the tone you’re trying to get rid of, then turn it down. Hint: it’s almost always the lower-mids making stuff sound muddy.)
This all being said, if you’re interested in this stuff I suggest dipping your toes in as a hobbyist first. If it becomes your obsession maybe consider a career, but only if you’ll be content working adjacent jobs rather than recording bands full time. Also, in case I didn’t make it quite clear, there’s a ton of networking involved. It’s easier if you actually play in a band, as I did (you don’t have to be good - just out there meeting people). I suppose it’d still be possible otherwise if you spend most of your free time at local shows and really get to know the musicians. Also, by the time I was getting in, home recording was a vibrant industry so wasn’t just competing with other engineers for jobs - I was also competing with bands just doing it themselves. I’m sure that’s only gotten tougher these days with cheap gear being so accessible.
I hope this doesn’t come across as demoralizing. I just want to make sure you know what you’re potentially getting yourself into. If you’re hating your current industry, though, and this all sounds overwhelming, another approach is to find something tolerable but maybe not what you envisioned, and make the best of it. In creative fields work typically becomes your life as it’s a constant grind to make ends meet and something that was once pleasurable inevitably becomes tainted by association. Some people have the emotional fortitude to survive under those conditions but I suspect they’re few and far between. I’ve worked probably a dozen jobs in my life before landing in my current role. Depending on how you count it, I’ve been here about 11 years and I fully expect this will be the company I work at for the rest of my working life (in part because my family bought the business a few years ago after several of us had worked there for years). The job has nothing to do with anything I went to school for and is in an industry I have no personal interest in. But, the work itself is interesting and sometimes creative,. Most importantly, the people are good, so I’m about as happy as a person can be in a job. Keep yourself open to opportunities like that, if you can find them. Buying the business helped, but even before that I had pretty much accepted that I was a lifer because this was the first grown-up job I felt content in.
Maybe too basic for you but the ATH-M50X bluetooth has served me well for mlre than 5 years and the only complaint I have is the faux leather comming off.
Ye, though tbh, I’ve thought about just getting a secondary pair of headphones, like a cheaper wireless pair for being out and about, and a more expensive pair for at home. If I went that route then I’d probably do something like the ath-m50x
Holy shit those actually kinda sound exactly like what I want. They are pretty expensive, and I wonder what the sound quality is like, but those are basically the kinda thing I’ve been looking for.
As an audiophile, I’ve tried these at an event and they sound pretty close to audiophile grade wired headphones. They have the Focal house signature (slightly warm but not bassy or boomy)
I don’t have a problem with wireless headphones when it comes to mobile devices. It sucks, and I wish I still had a headphone jack, but I’ve kinda come to peace with the fact that wireless accessories for phones are apparently the future.
However, I wish there were “mid/high-end” Bluetooth/wifi cans. All the wireless headphones are either earbuds, IEMs, or overpriced Skullcandy/beats/Bose/apple/etc. I want an AKG or Audio-Technica pair of wireless headphones that go over my ears, and I want an option between closed-back and open-back headphones. I prefer closed-back due to the sound isolation and I’m annoyed that there’s a price gap where it’s hard to find closed-back headphones in the $300~$600 range.
…or at least it was when I checked a year or two ago; everything with a closed back was either entry (<$100), low-level (<$300) or too expensive (>$600 + $100 or more for an amp, because at that price range most headphones need one).
Edit: oh yeah, and a optional balanced cable that uses a standardized connector, like miniXLR
Sennheiser has a few wireless cans in that category for ~$400
I’ll have to check them out, thanks!
I think the ATH-M50x has a BT version.
^ This person audio-engineers.
No judgement - just from reading your comment I definitely get this vibe. I get it though. Most wireless stuff is either going to be heavily EQed consumer trash or overpriced audiophile stuff with all the latest buzzwords. There just doesn’t seem to be much of a market for reference-grade stuff in a wireless format.
Not that I could justify spending a bunch on good headphones though, so I’ve settled for a low-end pair that sound acceptable for what they are.
I actually don’t, but maybe I should because I love audio stuff, I just don’t usually have the money to blow on it. Any idea what skills audio engineers usually have?
I used to actually know a ton about this stuff but haven’t touched a musical instrument or audio device in over 12 years. Sooooo, bear with me.
All of this will depend entirely where your interests lay in terms of audio production/engineering. One of the core skills would be the ability to pick out different sounds from a soundscape. I suspect you already have a knack for that given how much you seem to think about audio quality. Tied in with that would be an understanding of how digital audio works in terms of bitrate, dynamic range, what clipping sounds (and looks) like, etc. I’m sure there’s tons of info on all that online. Analog audio has a whole other set of skills associated with it, but I doubt it’s super accessible these days for a beginner. That’s outside of cassettes, at least. I’m sure old 4-track cassette recorders are super cheap. As much as I loved analog recording, you’re probably better off just going digitally and using processing to get an approximation of the “traditional” analog sound, though, if that’s your jsn. Or if you’re going for a black metal sound or something else intentionally grungy, go to town on a cassette deck.
From there I’d say the biggest skills would be understanding basic mic technique, the general physics of sound, and how to properly set your levels (basically the ratio of preamp vs amp). Next up would be figuring out basic processing - namely the different types of EQ and compression. Effects play into that too - especially reverb and delay - but EQ and compression (plus proper micing and levels) are generally going to be the foundation of a good mix.
That being said - this all entirely depends on what you’re going for. If you don’t do anything musical yourself and aren’t inclined to record other musicians, you can have tons of fun remixing other people’s work. I’m pretty sure there are sites out there where you can download raw audio tracks to mix yourself. Another viable option if you’re into electronic forms of music is to get a sequencer and experiment that way.
I got my start when I was maybe 13 or 14 with a cracked copy of Fruity Loops (I think it’s called FL Studio now). I used that to write dumb electronic songs despite having no theoretical musical or audio knowledge (besides having previously used the built in Windows sound recording software to layer weird shit I recorded with a crappy mic). That software also came with demo tracks that I experimented with. About a year later I got a bass guitar and started a punk band, and that led to all sorts of weird experimentation with recording mediums. From there I bought a shitty reel to reel tape deck and began recording punk bands out of their jam spaces, eventually went to school for audio engineering, had a bunch of jobs related to the art (while freelancing doing recording work and live sound), and finally burned out and never touched a guitar or mic again.
None of that is necessary or even something I’d recommend. It’s a perfectly legitimate hobby if you want to keep it small-scale. You can start it with almost no money, but that’s where I’d caution you if you have anything approaching an addictive personality - the gear can get super addictive as you begin a quest for the perfect tone. For a few years there I worked at a musical instrument store and most of my paycheck went right back to my work (the staff discount sure helped though). Likewise, most of what I’d make freelancing would go back to gear as well. That’s one of the big reasons I quit cold turkey one day. I still miss it as a hobby, but I know the second I start it back up I’ll be right back to dreaming of expensive tube preamps. Your own mileage may vary if you have better self-control.
I can already do a lot of this, and while I’m a bit lacking on the analog aspect, I have an okay understanding of how electricity works, which would probably help with the analog side.
Don’t have as much of an understanding here, especially when it comes to calling out specific frequencies to be EQ’d. I don’t do enough of that to be able to “play it by ear” and know what frequencies I want to adjust without some experimentation. I’m also somewhat familiar with how compressors work, but I need a UI because I tend to forget what bit does what, so I need visual feedback to show me what I’m changing. Shouldn’t be too difficult to memorize the terminology and how certain frequencies sound, but it would take some effort. I do understand how decibels work though!
It’s something I’d probably do as a career. The career I wanted to go into has turned out to be extremely toxic and heavily exploitive, so I’m kinda looking for alternatives. That said, most creative careers tend to be very exploitive so I might be looking in the wrong place.
If you really truly are interested in it as a career don’t hold back, but know that it’s a looooooong road for very little money and absolutely no guarantees. Like anything fairly creative, only the top percentile make actual good money (or even sustainable money), and even then you usually have to freelance and build your own reputation to get there. That said, there are viable adjacent jobs that use that skillset. I worked in corporate AV for a few years, which involves running sound, lighting, and video for events. It’s far from glamorous though, and mostly involves manual labor in setups and teardowns. You’re basically a roadie who also runs the gear, but instead of mixing cool rock shows you’re mixing a few mics and a PowerPoint presentation for a pharmaceutical convention. The hours can also suuuuuuuck. My longest shift was 20 hours. I got home at 3 AM after that and then had to be back at the shop for 7. You live on free coffee and cookies that the banquet staff give you (you get to be on a first-name basis with every hotel banquet server in your city). It can be weirdly fun as a youngster but I have no idea how the older techs survived. I regularly worked 40 hour weeks when I was part time and 60-80 when full-time. I burned out by like 22.
The music store gig was really fun though. I ran the rentals desk and spent a lot of time teaching my customers how to use the pro audio gear. That’s also the most ridiculous place I’ve ever worked in terms of memorable stories.
You can also run sound in a dive bar, but that’s mostly about who you know and involves more networking than you’d expect to work in a dive bar for very little money.
As far as actually being a professional audio engineer or producer who makes a living making records - that’s the real tough part. I suppose it’s possible to land a staff job in a studio, but that’s not really how it worked in my small city. I freelanced with my own gear and home studio for years until I met a (relatively - this is Canada) big-name producer who I’d built rapport with from my job in the music store. He offered to let me work out of his proper studio for a very reasonable rate. Note that this wasn’t a job - it was an offer to pay him to use his facility. Still, it was the closest thing I had to a break and for a few glorious months I was (barely) scraping by as a full-time recording engineer. The clientele I had built up over the previous decade were almost exclusively local punk and garage rock bands, meaning none of them had money, and now they had to pay real studio fees on top of my own, so I was charging way too little. I was technically doing it though, but then I finally fully burned out - due in part to some looming personal issues - and that was that.
As to all your other comments - alllll of that can be learned through study and experimentation. I went to an overpriced school to learn the fundamentals, but a diploma like that means shit and you can learn it just as well on your own. With stuff like EQ you don’t need to be able to instantly pick out a good/bad frequency fully by ear - there are little tricks for zoning in on what you’re looking for (crank the gain on the EQ and scan the frequency range until you find the tone you’re trying to get rid of, then turn it down. Hint: it’s almost always the lower-mids making stuff sound muddy.)
This all being said, if you’re interested in this stuff I suggest dipping your toes in as a hobbyist first. If it becomes your obsession maybe consider a career, but only if you’ll be content working adjacent jobs rather than recording bands full time. Also, in case I didn’t make it quite clear, there’s a ton of networking involved. It’s easier if you actually play in a band, as I did (you don’t have to be good - just out there meeting people). I suppose it’d still be possible otherwise if you spend most of your free time at local shows and really get to know the musicians. Also, by the time I was getting in, home recording was a vibrant industry so wasn’t just competing with other engineers for jobs - I was also competing with bands just doing it themselves. I’m sure that’s only gotten tougher these days with cheap gear being so accessible.
I hope this doesn’t come across as demoralizing. I just want to make sure you know what you’re potentially getting yourself into. If you’re hating your current industry, though, and this all sounds overwhelming, another approach is to find something tolerable but maybe not what you envisioned, and make the best of it. In creative fields work typically becomes your life as it’s a constant grind to make ends meet and something that was once pleasurable inevitably becomes tainted by association. Some people have the emotional fortitude to survive under those conditions but I suspect they’re few and far between. I’ve worked probably a dozen jobs in my life before landing in my current role. Depending on how you count it, I’ve been here about 11 years and I fully expect this will be the company I work at for the rest of my working life (in part because my family bought the business a few years ago after several of us had worked there for years). The job has nothing to do with anything I went to school for and is in an industry I have no personal interest in. But, the work itself is interesting and sometimes creative,. Most importantly, the people are good, so I’m about as happy as a person can be in a job. Keep yourself open to opportunities like that, if you can find them. Buying the business helped, but even before that I had pretty much accepted that I was a lifer because this was the first grown-up job I felt content in.
Maybe too basic for you but the ATH-M50X bluetooth has served me well for mlre than 5 years and the only complaint I have is the faux leather comming off.
Ye, though tbh, I’ve thought about just getting a secondary pair of headphones, like a cheaper wireless pair for being out and about, and a more expensive pair for at home. If I went that route then I’d probably do something like the ath-m50x
Focal Bathys? They are expensive and delicate though
Holy shit those actually kinda sound exactly like what I want. They are pretty expensive, and I wonder what the sound quality is like, but those are basically the kinda thing I’ve been looking for.
As an audiophile, I’ve tried these at an event and they sound pretty close to audiophile grade wired headphones. They have the Focal house signature (slightly warm but not bassy or boomy)