• Coreidan@lemmy.world
    link
    fedilink
    English
    arrow-up
    65
    arrow-down
    13
    ·
    1 year ago

    Enshitification continues. For awhile there I thought aviation was the safest industry, due to standards.

    Clearly there are no standards anymore and it’s just another industry that’s rotting away thanks to greed and a severe lack of empathy.

    I guess I’ll start reconsidering commercial flying.

    • hobovision@lemm.ee
      link
      fedilink
      arrow-up
      48
      ·
      1 year ago

      This is a sign that there are extremely right safety standards and lots of oversight. The amount of documentation needed for all aerospace parts means it is quite difficult to falsify records for long without getting caught. The fact that any of these types of event are big news and often result in arrests should help you be confident that the standards are real and enforced. There will always be bad actors, and finding them like this is part of reality. Just look at the safety record of commercial aviation to see proof that the system is working.

    • Margot Robbie@lemmy.world
      link
      fedilink
      arrow-up
      14
      arrow-down
      1
      ·
      1 year ago

      I mean, did everyone suddenly forgot about everything that happened with the 737 Max?

      Both the FAA and Boeing should be ashamed.

    • PsychedSy@sh.itjust.works
      link
      fedilink
      arrow-up
      11
      arrow-down
      1
      ·
      1 year ago

      Finished parts are much harder to verify without damaging them or the finish. We do get training on identifying counterfeits, though.

      Planes are still highly over-engineered.

      • seang96@spgrn.com
        link
        fedilink
        arrow-up
        7
        ·
        1 year ago

        I assume with the strict documentation on parts being put on planes they will have to replace or review any part that came from this distributor?

        • PsychedSy@sh.itjust.works
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          Not sure. Prolly depends on their investigation. If it’s one guy covering his ass that’s different than a manager pushing it as a normal thing. Anything fabricated had to be bought-off/stamped by someone, so they should be able to sort it out.

        • InverseParallax@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Absolutely, and other distributors will likely have to confirm their chain of provenance, and new procedures will be added for additional part tracking.

          They 100% do not screw around with this stuff, ever.

    • Treczoks@lemmy.world
      link
      fedilink
      arrow-up
      9
      ·
      1 year ago

      Well, the standards are still there, but if people don’t adhere to them, profits happen, so they gladly take some … mishaps into their calculation.

    • 𝔹𝕚𝕫𝕫𝕝𝕖@midwest.social
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      4
      ·
      1 year ago

      People are always saying “I don’t know about Bizzle, that dude won’t fly.” If I can’t drive there, I won’t go. You really should consider it, there are a lot of really cool things that you will only ever find out about when you drive past it on a state highway. It somewhat limits my destinations, but North America is a big place that I’ve yet to see all of so I don’t mind so much.

      • eee@lemm.ee
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        Even our great-grandparents’ generation endured weeks-long voyages on steamships to get to other places and cultures.

  • n3m37h@lemmy.dbzer0.com
    link
    fedilink
    arrow-up
    4
    arrow-down
    22
    ·
    1 year ago

    I’ve had lots of experience with Brits and they are the worst people. This does not surprise me in the slightest

    • jbxr97@lemmy.ml
      link
      fedilink
      arrow-up
      7
      arrow-down
      1
      ·
      1 year ago

      Not sure how one company based in London doing something wrong makes all Brits “the worst people” but alright

  • lefixxx@lemmy.world
    link
    fedilink
    English
    arrow-up
    11
    arrow-down
    80
    ·
    1 year ago

    are the parts made out of styrofoam? what does “fake parts” even mean?

    ARCs are airworthiness certificates for aircraft parts that ensure they are produced to specific standards. AOG Technics falsified these documents.

    so the documents are fake (and I still can’t confirm that)

    that doesn’t mean the parts are out of spec or that they cant do the thing they are supposed to do.

    these pose a huge safety risk.

    these COULD pose a huge safety risk. Until the parts are tested it is unclear if they are actually bad.

    this is a badly written article

    • Dettweiler@lemmy.world
      link
      fedilink
      arrow-up
      75
      ·
      edit-2
      1 year ago

      I’m going to start off with saying I am a certificated aircraft mechanic, and I’ve been exercising my privileges as such for several years on both passenger and cargo aircraft for several airframes.

      This situation is actually a VERY big deal and it is going to be VERY expensive and time consuming to fix.

      When a part is sold or repaired by a manufacturer, it comes with an airworthiness certificate. In the US, this is FAA form 8130-3. It not only certifies that the part conforms to specifications; but it shows who certified it, who tested it, what specs it meets, and the history of the part. Both the airline purchasing the part and the mechanic installing the part need this document to legally repair the aircraft.

      There could be a variety of problems with receiving fake parts that slip by SUP inspections (Suspected Unapproved Parts), and these are both legal and safety problems. A fake serial number means you don’t know the true history of the part. It could have been pulled from an abandoned aircraft from a third world country, and even though it passed a bench test, it could be a ticking time bomb. It could be a part in exceedence of service hours, but the paperwork that came with it says it’s freshly overhauled.

      It could just plain not meet specifications. Premature failure is a big deal. Especially when the list of things that can be broken on a plane (MEL / Missing Equipment List) and still be safe for flight depend on a rated level of reliability. As an example, an aircraft can operate with a certain number of brakes not working for a limited period of time (such as up to two inoperative, no more than one per pair, for no longer than 10 days or 10 flight cycles). This assumes that all of your other brakes aren’t going to prematurely, simultaneously fail before that time limit is up.

      This article specified that these are engine parts, which adds a whole other level of risk to flight safety. The CFM56 from this article can be rated for ETOPS 180, which stands for Extended Operations up to 180 minutes. Normally, twin-engine aircraft are required to remain with 60 minutes of a suitable airport in the event of an emergency. This often limits what routes certain aircraft can take. ETOPS allows certain aircraft to go farther than the 60-minute rule (in this case, up to 180 minutes), which is a huge deal in terms of flight time, efficiency, and simply whether or not they can fly internationally. To maintain ETOPS rating, the aircraft has to meet stricter specifications. These can range anywhere from parts with tighter tolerances, to things like larger oxygen and fire-extinguishing bottles. They also need to be able to start their APU in flight for a source of electricity in the event they lose an engine.

      The airline is also limited on the number of in-flight shutdowns they can have. This number is intentionally very low. If the airline as a whole exceeds this number, their fleet-wide ETOPS rating will be revoked.

      Parts have to be specifically rated for ETOPS to be installed on an aircraft flying ETOPS routes. Bad parts make this a huge risk. An in-flight shutdown is a very dangerous situation, and bad parts dramatically increase the risk of that becoming a dual engine failure while that plane spends 3 hrs diverting to the closest airport.

      Going forward, there is no good way to check if the parts sold actually meet specs until they’re disassembled and checked. Directives from the FAA will be issued. Inspections will be performed. Airplanes will be grounded and rectified. The manufacturer might be able to provide a list of parts that need to be recalled, but more than likely EVERY part they issued will be pulled. They may also have their repair station and manufacturing certificate from GE revoked. Even if they don’t lose their certification, most of the airlines will avoid them now.

      To address the points you made in your comment, lefixxx, false documents mean bad parts. These parts absolutely DO pose a safety risk. They very likely ARE out of spec, timed out, or simply not rated for what the papers say. Even if the part is tested and meets specs, the history of that part is lost. It will need to be overhauled and made “new” again in order to be airworthy.
      All of the regulations and strict document control requirements we follow have all been written in blood. People HAVE died because of things like this in the past, and it’s our mission to keep it from ever happening again.

      Edit:
      Here’s an excellent article detailing Partnair Flight 394, and the aftermath wherein they discovered a plethora of counterfeit parts not only on the airplane, but also across the industry at the time: https://admiralcloudberg.medium.com/riven-by-deceit-the-crash-of-partnair-flight-394-f8a752f663f8

      • RubberElectrons@lemmy.world
        link
        fedilink
        arrow-up
        5
        ·
        1 year ago

        Thank you for the insight here, this chain of trust is interesting.

        Sounds like the distributor of the suspect parts has accidentally hurt thir income in a very serious way if airlines are going to start skipping them.

      • eee@lemm.ee
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        Can I just say, thank you for the extremely informative post.

        This is the kind of comment that reddit was valuable for - being able to jump on a thread about find an obscure expert in pretty much any niche field. Lemmy hasn’t really reached a sufficiently large userbase, so seeing a post of this is like a breath of fresh air.

      • bobman@unilem.org
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        These are the informative posts that I come to lemmy for these days.

        It’s next to impossible to find them on that other site. Everything thinks they’re a comedian.

      • PsychedSy@sh.itjust.works
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        My company had us signing 8130s instead of a DFAR for a while. We caught it after the quality manager went on a crack binge and got fired.

    • gravitas_deficiency@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      46
      arrow-down
      3
      ·
      1 year ago

      I don’t think you quite understand the level of rigor that these components are manufactured with. If the documents are not provided, or if they’re counterfeited, the parts are assumed to be out of spec. The precision required for these things, as well as the integrity analysis done after they’re completed, are absolutely critical, and can make the difference between 1000 and 10000 hours MTBF on something like a compressor stage.

      • lefixxx@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        27
        ·
        1 year ago

        I agree that the parts are probably out of spec and assuming they are, is definitely the way to go, but I am dissapointed by the lack of precision in articles like that.

        This is the first (maybe the second) link in the chain of misinformation. Every time this article will get reposted, rewritten or reblogged the inaccuracies will move the baseline for the next one.

        • gravitas_deficiency@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          15
          ·
          1 year ago

          Fair, though keep in mind the intended audience is the average layperson, which means the bar is set pretty low in terms of the technical nuance of the writing.

          • rayyyy@kbin.social
            link
            fedilink
            arrow-up
            15
            ·
            edit-2
            1 year ago

            Exactly. Try to explain that a .05 difference in carbon content can result in a substantial increase/decrease in tensile strength - eyes glaze over. When the right engine blows eyes unglaze.

            • gravitas_deficiency@sh.itjust.works
              link
              fedilink
              English
              arrow-up
              7
              ·
              1 year ago

              That, or how quality analysis can detect things like improper metal crystal formation and other molecular-level defects that impact material integrity and suitability, amongst many other things.

            • SheeEttin@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              This falsification was identified because the system works. I would be far more concerned if they never found anything wrong.

            • PsychedSy@sh.itjust.works
              link
              fedilink
              arrow-up
              2
              ·
              1 year ago

              You should. Even exposed to the absolute idiocy of some aircraft mechanics I still love to fly. Safety margins are pretty good.

        • persolb@lemmy.ml
          link
          fedilink
          arrow-up
          15
          ·
          1 year ago

          The issue is that the article (and anybody else) CaN’T be more precise.

          We don’t know if the parts are good because they faked the testing.

          We can also almost guarantee that some are out of spec. ‘Simple’ things like screws even have fallout when tested.

    • FuglyDuck@lemmy.world
      link
      fedilink
      English
      arrow-up
      26
      ·
      edit-2
      1 year ago

      Individual parts could be not a safety risk.

      But it is inevitable that if they’re not testing parts, ornwhatever, that parts not meeting standards will come into use.

      Which means you’re wrong about this only potentially being a safety risk. It IS a safety risk. Period.

      They’re intentionally falsifying documents to save a buck. They should be fucked out of business and the idiots who thought it was a good idea thrown in jail. (That would likely be the Execs.)

    • Hildegarde@lemmy.world
      link
      fedilink
      arrow-up
      17
      ·
      1 year ago

      There is no reason to fake the certification documents unless you’re not following the required standards.

      Why would a manufacturer go through all the effort and expense to make parts at the required standards, with hugely expensive manufacturing, only to take on a huge risk to save a negligible amount on the paperwork? That is a horrible business decision.

      • teuto@lemmy.teuto.icu
        link
        fedilink
        arrow-up
        5
        arrow-down
        1
        ·
        1 year ago

        The paperwork cost isn’t negligible at all. For example a company I used to work for had to replace a simple O-ring that failed. It’s an old part and quite rare these days and cost $800 to replace. You could buy a functionally equivalent (likely better) uncertified part for about 5 cents. That is why uncertified parts are such a problem, because certified ones are so incredibly expensive. Plenty of companies would love to step in and buy a few thousand O rings and sell them for $400 and a few are willing to forge a paper trail to make it happen. It’s a problem that I don’t really think will be ever totally solved without making certification too easy and potentially sacrificing safety by having bad certified parts.

        • tastysnacks@programming.dev
          link
          fedilink
          arrow-up
          4
          ·
          1 year ago

          If you spent $800 on an oring and it fails and the plane goes down, the manufacturer is liable. If you spent $0.05 on the oring and the plane goes down, you’re liable. Like you said, paperwork isn’t cheap. Because its basically liability insurance. If you made the oring, would you accept liability for $0.05?

          • teuto@lemmy.teuto.icu
            link
            fedilink
            arrow-up
            1
            ·
            1 year ago

            The problem isn’t the manufacturer or the operator, it’s the middleman looking to make a profit on the the difference. In any case $800 is an absolutely ridiculous price point regardless of liability. I don’t know where the fair price point is but not even close to that. Liability isn’t the primary driver for the cost anyway, it’s difficulty of certification. Getting any part certified runs from high 5 figures to many millions of dollars and these are all extremely low volume parts. Boeing has only made around 11,000 737s since 1967. The plane I’m working with now only has around ~250 built since 2015 and is quite successful. For comparison Toyota produces about 20 cars per minute. When you need to pay back certification costs and turn even a modest profit on such low volume you need to charge a ton for each part.

            To be clear I am absolutely not in support of non certified parts, it’s just a big problem in the industry and for rather obvious reasons.

    • Actaeon@artemis.camp
      link
      fedilink
      arrow-up
      14
      ·
      edit-2
      1 year ago

      these COULD pose a huge safety risk. Until the parts are tested it is unclear if they are actually bad.
      this is a badly written article

      The article is correct. The safety risk is that the parts COULD be dangerous to use. Whether the parts are actually defective or not is irrelevant because they don’t know; that’s what makes them a risk.

    • RedditWanderer@lemmy.world
      link
      fedilink
      arrow-up
      10
      arrow-down
      1
      ·
      1 year ago

      Yes these COULD pose a safety risk, until they are tested it’s unclear they are actually GOOD.

      FTFY.

      Air travel is one of the safest modes of transportation because we have these measures in place and take them seriously.

      • gravitas_deficiency@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        And importantly, it wasn’t safe for a very long time, specifically because these rules and regs weren’t yet written. A TON of flight safety laws, rules, and guidelines have been written in direct response to accidents that have destroyed planes and killed everyone on them, so it’s actually quite accurate to say those rules are written in blood.

    • PsychedSy@sh.itjust.works
      link
      fedilink
      arrow-up
      7
      ·
      1 year ago

      If any of the paperwork is missing or falsified the part is scrap. When we buy material it comes with certified reports on the alloy’s component elements.

      Inconel is often used around engines for heat resistance. If it has too much of an element that changes at what temperature it becomes ductile you could lose some very important components or systems.

      Steel doped with sulfur raises its embrittlement temperature.

      They’ll be tested to sort out the urgency of the corrective action, but those parts are scrap. Also, someone might be going to prison.

      • InverseParallax@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Someone will be going to prison, and there will likely be a full AD if there’s a chance more parts got out.

        New procedures for parts tracking and distributor custody chain, this is a real nightmare for a bunch of people.

    • GreyEyedGhost@lemmy.ca
      link
      fedilink
      arrow-up
      6
      ·
      1 year ago

      Is it insane to play Russian roulette? There’s a good chance nothing will happen if you pull that trigger, right?

      By definition, risk means there is no guarantee of a specific outcome. There is no risk of falling if you jump off a cliff (without special aids) - you just fall. Smoking increases your risk of cancer. Bob Hope lived to 100, apparently cancer-free, while smoking. Neither of these statements are untrue, he just didn’t suffer the results those risks indicated. While that’s good for him, it’s not the attitude I want taken with aircraft parts.

    • Fuck Yankies@lemmy.ml
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      Damn. Falsification of documentation means you can’t run as much as a McDonald’s where I’m from.

    • yawn@lemmy.world
      link
      fedilink
      arrow-up
      3
      arrow-down
      2
      ·
      1 year ago

      Most metal parts testing is destructive. I.e., once you test the parts, they are destroyed and you can’t use them anymore. That’s why the trust I certificates is so important. They certify that metal from the same batch passed those tests. That’s why it’s a huge safety risk if the certs are fake, there’s no guarantee that the metal can meet the requirements, and no way to test without breaking the parts.